 |
|
|
|
I'm Online Chat Now
Certification
3 Phase Perkins Diesel Generators 39.6kw 49.5kVA Silent / Open Type
|
Product Details:
Payment & Shipping Terms:
|
Detailed Product Description
| Output Capacity: | 45/49.5kVA | Output Power: | 36/39.6kW |
|---|---|---|---|
| Type: | Generator Set | Engine: | Perkins |
| Frequency: | 50Hz / 60Hz | Cooling Type: | Water Cooled |
| High Light: | Perkins Diesel Generator Set,Perkins Diesel Genset |
||
3 Phase Perkins Diesel Generators 39.6kw 49.5kVA Silent / Open Type
| HDP Series HDP40 / HDP40S |
|
Model |
Standby Power |
Prime Power |
Engine |
Alternator |
Control Panel |
|||
|
KVA |
KW |
KVA |
KW |
Stamford |
Hidier(Optional) |
Model |
||
|
HDP40/S |
49.5 |
39.6 |
45 |
36 |
1103A-33TG1 |
UC1224D |
HD36 |
AMF20 |
|
Spec #1 Features |
|
|
1 |
Excitation system: self-excited (AREP and PMG are optional) |
|
2 |
ATS (automatic transfer switch) receptacle |
|
3 |
Lockable battery isolator switch |
|
4 |
Stainless galvanized zinc plates with strong corrosion resistance |
|
5 |
Vibration isolators between the engine/alternator and base frame |
|
6 |
Integrated wiring design |
|
7 |
Base fuel tank for at least 8 hours running |
|
8 |
Equipped with an industrial muffler |
|
9 |
50℃ radiator |
|
10 |
Top lifting and steel base frame with forklift holes |
|
11 |
Drainage for fuel tank |
|
12 |
Complete protection functions and safety labels |
|
13 |
IP54 (soundproof sets), IP56 (control system) |
|
14 |
Water jacket preheater, oil heater are available. |
|
15 |
Double air cleaner, spare parts, special tools are available. |
|
16 |
Custom-made is acceptable |
| 17 | Engine oil pump |
|
Generator Set Model |
Length (L) mm |
Width (W) mm |
Height (H) mm |
Net Weight kg |
|
HDP40 |
1900 |
800 |
1400 |
880 |
|
HDP40S |
2300 |
1100 |
1600 |
1370 |
| Spec#2 Engine Perkins 1103A-33TG1 |
45.6 kWm @ 1500 rpm
53.9 kWm @ 1800 rpm
1100 Series is the result of an intensive period of customer research that has guided the development of the range.
The new 3.3 litre cylinder block ensures bore roundness is maintained under the pressures of operation. It also ensures combustion and mechanical noise is lowered.
A new cylinder head has re-established Perkins mastery of air control.
The new 3.3 litre cylinder block ensures bore roundness is maintained under the pressures of operation. It also ensures combustion and mechanical noise is lowered.
A new cylinder head has re-established Perkins mastery of air control.
|
Engine speed |
Type of |
Typical generator |
Engine power |
||||
|
(rev/min) |
Operation |
output (net) |
Gross |
Net |
|||
|
|
|
kVA |
kWe |
kWm |
bhp |
kWm |
bhp |
|
1500 |
Prime power |
45 |
36 |
42.2 |
56.6 |
41.3 |
55.4 |
|
Standby power |
49.6 |
39.7 |
46.5 |
62.4 |
45.6 |
61.2 |
|
|
1800 |
Prime power |
53.1 |
42.5 |
50.5 |
67.7 |
48.9 |
65.6 |
|
Standby power |
58.7 |
46.9 |
55.6 |
74.6 |
53.9 |
72.3 |
|
Standard electropaK specification
Air inlet
Mounted air filter
Fuel system
Rotary type pump
Ecoplus fuel filter
Lubrication system
Wet sump with filler and dipstick
Spin-on oil filter
Cooling system
Thermostatically controlled system with gear-driven circulation pump and belt-driven pusher fan
Mounted radiator and piping
Electrical equipment
12 volt starter motor and 12 volt 65 amp alternator with DC output
12 volt shut-off solenoid energised to run
Flywheel and housing
High inertia flywheel to SAE J620 Size 10/111/2
SAE 3 flywheel housing
Mountings
Front engine mounting brackets
|
Fuel Consumption |
||||
|
Engine Speed |
1500 rev/min |
1800 rev/min |
||
|
UK g/hr |
l/hr |
UK g/hr |
l/hr |
|
|
At standby power |
2.6 |
12 |
3.1 |
14.3 |
|
At prime power |
2.3 |
10.7 |
2.8 |
12.9 |
|
At 75% of prime power |
1.8 |
8.2 |
2.1 |
9.9 |
|
At 50% of prime power |
1.2 |
5.7 |
1.5 |
7.1 |
General Data
Number of cylinders ..................................................................3
Cylinder arrangement ...........................................Vertical in-line
Cycle ..............................................................................4 stroke
Aspiration ............................................................ Turbocharged
Combustion system.......................................... ....direct injection
Compression ratio ...........................................................17.25:1
Bore and Stroke ................................................. 105 x 127 mm
Displacement ............................................................... 3.3 litres
Direction of rotation ................Anti-clockwise viewed on flywheel
Cooling system..................................................... Water cooled
Total coolant capacity................................................. 10.2 litres
Total lubrication system capacity ................................. 7.9 litres
Dimensions
Length .........................................................................1049mm
Width ............................................................................634 mm
Height ............................................................................951mm
Total weight (dry)........................................................... 420 kg
Final weight and dimensions will depend on completed specification.
| Spec#3 Alternator Stamford UC1224D |
|
Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards such as BS5000, VDE0530, NEMA MG1-32, IEC34, CSA C22.2-100, AS1359. Other standards and certifications can be considered on request. |
|
CONTROL SYSTEM |
SEPARATELY EXCITED BY P.M.G. |
||
|
A.V.R. |
MX321 |
MX341 |
|
|
VOLTAGE REGULATION |
± 0.5 % |
± 1.0 % |
With 4% ENGINE GOVERNING |
|
SUSTAINED SHORT CIRCUIT |
REFER TO SHORT CIRCUIT DECREMENT CURVES (page 7) |
||
|
CONTROL SYSTEM |
SELF EXCITED |
||
|
A.V.R. |
SX460 |
AS440 |
|
|
VOLTAGE REGULATION |
± 1.0 % |
± 1.0 % |
With 4% ENGINE GOVERNING |
|
SUSTAINED SHORT CIRCUIT |
SERIES 4 CONTROL DOES NOT SUSTAIN A SHORT CIRCUIT CURRENT |
||
|
INSULATION SYSTEM |
CLASS H |
||
|
PROTECTION |
IP23 |
||
|
RATED POWER FACTOR |
0.8 |
||
|
STATOR WINDING |
DOUBLE LAYER CONCENTRIC |
||
|
WINDING PITCH |
TWO THIRDS |
||
|
WINDING LEADS |
12 |
||
|
STATOR WDG. RESISTANCE |
0.129 Ohms PER PHASE AT 22°C SERIES STAR CONNECTED |
||
|
ROTOR WDG. RESISTANCE |
0.64 Ohms at 22°C |
||
|
EXCITER STATOR RESISTANCE |
21 Ohms at 22°C |
||
|
EXCITER ROTOR RESISTANCE |
0.071 Ohms PER PHASE AT 22°C |
||
|
R.F.I. SUPPRESSION |
BS EN 61000-6-2 & BS EN 61000-6-4,VDE 0875G, VDE 0875N. refer to factory for others |
||
|
WAVEFORM DISTORTION |
NO LOAD < 1.5% NON-DISTORTING BALANCED LINEAR LOAD < 5.0% |
||
|
MAXIMUM OVERSPEED |
2250 Rev/Min |
||
|
BEARING DRIVE END |
BALL. 6312-2RS (ISO) |
||
|
BEARING NON-DRIVE END |
BALL. 6309-2RS (ISO) |
||
|
|
1 BEARING |
2 BEARING |
|
|
WEIGHT COMP. GENERATOR |
285 kg |
290 kg |
|
|
WEIGHT WOUND STATOR |
86 kg |
86 kg |
|
|
WEIGHT WOUND ROTOR |
86.28 kg |
77.9 kg |
|
|
WR² INERTIA |
0.4216 kgm2 |
0.4198 kgm2 |
|
|
SHIPPING WEIGHTS in a crate |
307 kg |
311 kg |
|
|
PACKING CRATE SIZE |
97 x 57 x 96(cm) |
97 x 57 x 96(cm) |
|
| Spec#4 Control System ComAp InteliLite®AMF20 |
InteliLite'" AMF 20 and InteliLite'" AMF 25 are new integrated controllers for gen-sets operating in single standby mode. They meet all possible requirements for AMF applications, including modem control, user configuration and full gen-set monitoring and protection.
InleliLile@> controllers are equipped with a powerful graphic display. Icons, symbols and bar graphs for intuitive operation together with high functionality set new standards in gen-set control.
Special low temperature (IL-AMF 20-LT or IL-AMF 25-)version is also available, allowing the display to work up to -30oC.
Features
• Support of engines equipped with Electronic Control Unit (J1939 interface)
• Comprehensive diagnostic messages; SPN/FMI codes;KWP2000 support
• Automatic or manual start/stop of the gen-set
• Push buttons for simple control, lamp test
• Graphic back-lit LCD display 128x64 Pixels
• 6 LED indicators
• Parameters adjustable via keyboard or PC
• Mains measurements (50/60 Hz): U1-U3,Hz
• Generator measurements (50/60 Hz): U1-U3, I1-I3,Hz,kW,kVAr,kWh
• Selectable protections alarm/shutdown
• 3 phase Generator protections
- Over-/under voltage
- Over-/under frequency
- Current/voltage asymmetry
- Over current/overload
• 3 phase AMF function
- Over-/under frequency
- Over-/under voltage
- Voltage asymmetry
• Configurable analog inputs
• Battery voltage engine speed (pick-up) measurement
• Con1igurable programmable binary inputs and outputs
• Warm-up and cooling functions
• Generator C.B and Mains C.B. control with feedback and return timer
• RS232 interface (AT-LINK CONV cable is necessary for IL-AMF 20)
• Modem communication support (IL-AMF 25 only)
• Dimensions 180x120 mm (front panel)
• Sealed to IP65
| Spec #5 Options |
|
Items |
Options |
Select |
|
Engine |
Water Jacket Preheater |
|
|
Oil Preheater |
|
|
|
Alternator |
Winding Temperature Measuring Instrument |
|
|
Alternator Preheater |
|
|
|
PMG |
|
|
|
Anti-damp and anti-corrosion treatment |
|
|
|
Anti-condensation heater |
|
|
|
Generator Set |
Tools with the machine |
|
|
Fuel System |
Low fuel level alarm |
|
|
Automatic fuel feeding system |
|
|
|
Fuel T-valves |
|
|
|
Canopy |
Trailer |
|
|
Lubricating sys |
Oil with the machine |
|
|
Exhaust Sys. |
Protection board from hotness |
|
|
Cooling Sys. |
Front heat protection |
|
|
Coolant (-30°C) |
|
|
|
Control Panel |
Remote control panel |
|
|
ATS |
|
|
|
DSE |
|
|
|
Voltages |
415/240V |
|
|
400/230V |
|
|
|
380/220V |
|
|
|
220/127V |
|
|
|
200-115V |
|
Contact Details
Hidier Power Group (Beijing) Co., Ltd.
Contact Person: Mr. Yang Congli(Colin)
Tel: +86 13370160269
Fax: 86-10-59602578
Send your inquiry directly to us
More Perkins Diesel Generators
-
24kw 30kVA Perkins Diesel Generators
-
Water Cooling Perkins Diesel Generators
-
10kw Perkins Diesel Generators
-
Stamford Alternstor Perkins Diesel Generators Stainless Galvanized Zinc Plates 22Kw
-
70KW Water Cooled Perkins Diesel Generator Set With Stamford Alternator , 50Hz / 60Hz
-
Silent / Open Type Perkins Diesel Generators 3 Phase With Water Cooling System