Stamford Alternstor Perkins Diesel Generators Stainless Galvanized Zinc Plates 22Kw

 

 

      Building upon Perkins proven reputation within the power generation industry, the 1100 Series range of ElectropaK engines now fit even closer to customers needs. In the world of power generation success is only gained by providing more for less. With the 1103A-33G Perkins has engineered even higher levels of reliability, yet lowered the cost of ownership.1100A units are designed for territories that do not require compliance to EPA or EU emissions legislation. Theseunits are able to meet TA luft legislation.

1100 Series

•1100 Series is the result of an intensive period of customer research that has guided the development of the range.

•The new 3.3 litre cylinder block ensures bore roundness is maintained under the pressures of operation. It also ensures combustion  and mechanical noise is lowered. 

•A new cylinder head has re-established Perkins mastery of air control.

Cost Effective Power

•Compact size and low noise.

• Lower fuel consumption and oil use.

• 500 hour service intervals.

• Two year warranty.

Engine speed		Typical Generator		Engine Power
rev/min	Operation	Output (Net)		Gross		Net
	Type	kVA	kWe	kW	bhp	kW	bhp
1500	Prime Power	30	24	28.2	37.8	27.7	37.1
	Standby (maximum)	33	26.4	31	41.6	30.4	40.8
1800	Prime Power	34.9	27.9	33.2	44.5	32.2	43.2
	Standby (maximum)	38.2	30.6	36.5	48.9	35.4	62.5

 

General Data

Number of cylinders .............................................3 vertical in-line

Cylinder arrangement ............................................Vertical in-line

Cycle .......................................................................... ...4 stroke

Aspiration ..................................................... Naturally aspirated

Combustion system........................................... Indirect injection

Compression ratio ..........................................................19.25:1

Bore and Stroke ................................................. 105 x 127 mm

Displacement ............................................................   3.3 litres

Cooling system..................................................... Water cooled

Total coolant capacity............................................... 10.2 litres

Total lubrication system capacity ..................................7.9litres 

Dimensions

Length ....................................................................... 1029 mm

 Width (including mounting brackets) ........................... 629 mm 

 Height ..........................................................................951 mm 

 Total weight (dry).......................................................... 412 kg

Final weight and dimensions will depend on completed specification.

 

Spec#3  Alternator     StamfordP1142D

 

PI142DSPECIFICATIONS & OPTIONS     Standard  generators  are  3-phase  reconnectable  with  12 ends brought out to the terminals, which are mounted at the non-drive end of the generator.  Dedicated single phase generators are also available. A sheet steel terminal box contains   provides  ample  space  for  the  customers'  wiring and gland arrangements. Alternative terminal boxes are available  for  customers  who  want  to  fit  additional components in the terminal box.

CONTROL SYSTEM	STANDARD AS480 AVR (SELF EXCITED)
VOLTAGE REGULATION	± 1.0 %
SUSTAINED SHORT CIRCUIT	SELF EXCITED MACHINES DO NOT SUSTAIN A SHORT CIRCUIT CURRENT
CONTROL SYSTEM	AS480 AVR WITH OPTIONAL EXCITATION BOOST SYSTEM (EBS)
SUSTAINED SHORT CIRCUIT	REFER TO SHORT CIRCUIT DECREMENT CURVE (page 8)
INSULATION SYSTEM	CLASS H
PROTECTION	IP23
RATED POWER FACTOR	0.8
STATOR WINDING	DOUBLE LAYER CONCENTRIC
WINDING PITCH	TWO THIRDS
WINDING LEADS	12
STATOR WDG. RESISTANCE	0.378 Ohms PER PHASE AT 22°C  SERIES STAR CONNECTED
ROTOR WDG. RESISTANCE	1.125 Ohms at 22°C
EXCITER STATOR RESISTANCE	18 Ohms at 22°C
EXCITER ROTOR RESISTANCE	0.128 Ohms PER PHASE AT 22°C
EBS STATOR RESISTANCE	12.9 Ohms at 22°C
R.F.I. SUPPRESSION	BS EN 61000-6-2 & BS EN 61000-6-4,VDE 0875G, VDE 0875N. refer to factory for others
WAVEFORM DISTORTION	NO LOAD < 1.5%  NON-DISTORTING BALANCED LINEAR LOAD < 5.0%
MAXIMUM OVERSPEED	4450 Rev/Min
BEARING DRIVE END	BALL. 6309 - 2RS. (ISO)
BEARING NON-DRIVE END	BALL. 6306 - 2RS. (ISO)
	1 BEARING		2 BEARING
	WITH   EBS	WITHOUT   EBS	WITH   EBS	WITHOUT   EBS
WEIGHT COMP. GENERATOR	120.5  kg	118.8  kg	123.5  kg	121.8  kg
WEIGHT WOUND STATOR	52.8 kg	52.8 kg	52.8 kg	52.8  kg
WEIGHT WOUND ROTOR	33.81  kg	32.11  kg	34.87  kg	33.17  kg
WR² INERTIA	0.096  kgm2	0.0943  kgm2	0.0962  kgm2	0.0945  kgm2
SHIPPING WEIGHTS in a crate	100  kg	98.3  kg	109  kg	145.3  kg
PACKING CRATE SIZE	71 x 51 x 67 (cm)		71 x 51 x 67 (cm)

 

Spec#4  Control System   ComAp InteliLite®MRS10

InteliLite®  MRS 10 and InteliLite®MRS 15 are new integrated controllers for engine control in manual and remote start applications, featuring full gen-set monitoring and protection. InteliLite®  controllers are equipped with a powerful graphic display. Icons, symbols and bar graphs  for intuitive operation together with high functionality set new standards in gen-set control. Special low temperature (IL-MRS 10 -LT